Content about the diamond saw blade

Saw blade is a general term for thin circular cutting tools used to cut solid materials. Saw blade can be divided into diamond saw blade for stone cutting; high speed steel saw blade for metal material cutting (not inlaid with a cemented carbide blade); cemented carbide saw blade for solid wood, furniture, wood-based panel, aluminum alloy, aluminum profile, radiator, plastic, plastic steel and so on.

Diamond saw blade use requirements

Diamond saw blade manufacturing method

Diamond saw blade category

Diamond saw blade use requirements

1. Before working, the workpiece should be fixed, the profile positioning is in line with the direction of the cutter, so as not to cause abnormal cutting, do not apply side pressure or curve cutting, the feed tool should be stable, avoid the blade impact contact with the workpiece, resulting in saw blade breakage, or workpiece flying out, accidents occur.

2. When working, when it is found that the sound and vibration are abnormal, the cutting surface is rough, or the peculiar smell occurs, the operation must be terminated immediately, checked in time, and the faults should be eliminated to avoid accidents.

3. When you start cutting and stop cutting, don't feed too fast to avoid broken teeth and breakage.

4. If you cut aluminum alloy or other metals, use a special cooling lubricant to prevent the saw blade from overheating, resulting in paste teeth, and other damage, affecting the cutting quality.

5. Equipment chip removal tank and slag absorption device to ensure smoothness, to prevent the accumulation of slag into blocks, affecting production and safety.

Diamond saw blade manufacturing method

With the rapid development of automobile, aviation and aerospace technology, the requirements for material properties and processing technology are increasing day by day. New materials such as carbon fiber reinforced plastics, particle reinforced metal matrix composites (PRMMC) and ceramic materials have been widely used. These materials have the characteristics of high strength, good wear resistance, small thermal expansion coefficient and so on, which determines that the life of cutting tools is very short when they are machined. The development of new wear-resistant and stable super-hard cutting tools is a research topic in many colleges and universities, scientific research institutes and enterprises. Diamond integrates many excellent properties, such as mechanics, optics, thermodynamics, acoustics, optics and so on. It has very high hardness, low friction coefficient, high thermal conductivity, low thermal expansion coefficient and chemical inertia. It is an ideal material for manufacturing cutting tools.

Diamond saw blade category

1. Steel is used to cut angle iron, steel plate, slot iron, I-beam, pipe fittings and other ferrous metal profiles and components.

2. Ultra-thin steel is used to cut metals including wavy tiles, metal sheets, pipes and refined steel whose thickness is less than 1 ≤ 8 ", and there is no burr around the cutting edge.

3. Stainless steel is used to cut all stainless steel, including stainless steel plates, pipes and commercial kitchen stainless steel equal to or less in thickness.

4. Aluminum is used to cut aluminum forgings with a thickness equal to or less than 3 ≤ 8 ", including aluminum molded parts, aluminum plates, aluminum angles and aluminum fences.

5. Wood is used to cut wood of any size and shape, including wood of a size of 2 / 4 / s.